.config/ci.yml

@@ -6,7 +6,7 @@
 #───┘ URL └─────────────────────────────────────────────────────
 
 # Final accessible URL seen by a user.
-url: https://example.tld/
+url: http://misskey.local
 
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # URL SETTINGS AFTER THAT!
@@ -103,10 +103,38 @@ redis:
 #  #prefix: example-prefix
 #  #db: 1
 
-#   ┌───────────────────────────┐
-#───┘ MeiliSearch configuration └─────────────────────────────
-
-# You can set scope to local (default value) or global 
+#redisForRateLimit:
+#  host: localhost
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+#  # You can specify more ioredis options...
+#  #username: example-username
+
+#   ┌───────────────────────────────┐
+#───┘ Fulltext search configuration └─────────────────────────────
+
+# These are the setting items for the full-text search provider.
+fulltextSearch:
+  # You can select the ID generation method.
+  # - sqlLike (default)
+  #   Use SQL-like search.
+  #   This is a standard feature of PostgreSQL, so no special extensions are required.
+  # - sqlPgroonga
+  #   Use pgroonga.
+  #   You need to install pgroonga and configure it as a PostgreSQL extension.
+  #   In addition to the above, you need to create a pgroonga index on the text column of the note table.
+  #   see: https://pgroonga.github.io/tutorial/
+  # - meilisearch
+  #   Use Meilisearch.
+  #   You need to install Meilisearch and configure.
+  provider: sqlLike
+
+# For Meilisearch settings.
+# If you select "meilisearch" for "fulltextSearch.provider", it must be set.
+# You can set scope to local or global (default value)
 # (include notes from remote).
 
 #meilisearch:
@@ -167,8 +195,18 @@ id: 'aidx'
 # IP address family used for outgoing request (ipv4, ipv6 or dual)
 #outgoingAddressFamily: ipv4
 
-# Amount of characters that can be used when writing notes (maximum: 8192, minimum: 1)
-maxNoteLength: 3000
+# Amount of characters that can be used when writing notes. Longer notes will be rejected. (minimum: 1)
+#maxNoteLength: 3000
+# Amount of characters that will be saved for remote notes. Longer notes will be truncated to this length. (minimum: 1)
+#maxRemoteNoteLength: 100000
+# Amount of characters that can be used when writing content warnings. Longer warnings will be rejected. (minimum: 1)
+#maxCwLength: 500
+# Amount of characters that will be saved for remote content warnings. Longer warnings will be truncated to this length. (minimum: 1)
+#maxRemoteCwLength: 5000
+# Amount of characters that can be used when writing media descriptions (alt text). Longer descriptions will be rejected. (minimum: 1)
+#maxAltTextLength: 20000
+# Amount of characters that will be saved for remote media descriptions (alt text). Longer descriptions will be truncated to this length. (minimum: 1)
+#maxRemoteAltTextLength: 100000
 
 # Proxy for HTTP/HTTPS
 #proxy: http://127.0.0.1:3128
@@ -198,13 +236,16 @@ proxyRemoteFiles: true
 #   https://example.com/thumbnail.webp?thumbnail=1&url=https%3A%2F%2Fstorage.example.com%2Fpath%2Fto%2Fvideo.mp4
 #videoThumbnailGenerator: https://example.com
 
-# Sign to ActivityPub GET request (default: true)
+# Sign outgoing ActivityPub GET request (default: true)
 signToActivityPubGet: true
-# check that inbound ActivityPub GET requests are signed ("authorized fetch")
-checkActivityPubGetSignature: false
+# Sign outgoing ActivityPub Activities (default: true)
+# Linked Data signatures are cryptographic signatures attached to each activity to provide proof of authenticity.
+# When using authorized fetch, this is often undesired as any signed activity can be forwarded to a blocked instance by relays and other instances.
+# This setting allows admins to disable LD signatures for increased privacy, at the expense of fewer relayed activities and additional inbound fetch (GET) requests.
+attachLdSignatureForRelays: true
 
 # For security reasons, uploading attachments from the intranet is prohibited,
-# but exceptions can be made from the following settings. Default value is "undefined". 
+# but exceptions can be made from the following settings. Default value is "undefined".
 # Read changelog to learn more (Improvements of 12.90.0 (2021/09/04)).
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
@@ -214,3 +255,33 @@ checkActivityPubGetSignature: false
 
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
+
+# CHMod-style permission bits to apply to uploaded files.
+# Permission bits are specified as a base-8 string representing User/Group/Other permissions.
+# This setting is only useful for custom deployments, such as using a reverse proxy to serve media.
+#filePermissionBits: '644'
+
+# Log settings
+# logging:
+#   sql:
+#     # Outputs query parameters during SQL execution to the log.
+#     # default: false
+#     enableQueryParamLogging: false
+#     # Disable query truncation. If set to true, the full text of the query will be output to the log.
+#     # default: false
+#     disableQueryTruncation: false
+
+# Settings for the activity logger, which records inbound activities to the database.
+# Disabled by default due to the large volume of data it saves.
+#activityLogging:
+  # Log activities to the database (default: false)
+  #enabled: false
+
+  # Save the activity before processing, then update later with the results.
+  # This has the advantage of capturing activities that cause a hard-crash, but doubles the number of queries used.
+  # Default: false
+  #preSave: false
+
+  # How long to save each log entry before deleting it.
+  # Default: 2592000000 (1 week)
+  #maxAge: 2592000000

.config/cypress-devcontainer.yml

+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+# Misskey configuration
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+#   ┌────────────────────────┐
+#───┘ Initial Setup Password └─────────────────────────────────────────────────────
+
+# Password to initiate setting up admin account.
+# It will not be used after the initial setup is complete.
+#
+# Be sure to change this when you set up Misskey via the Internet.
+#
+# The provider of the service who sets up Misskey on behalf of the customer should
+# set this value to something unique when generating the Misskey config file,
+# and provide it to the customer.
+setupPassword: example_password_please_change_this_or_you_will_get_hacked
+
+#   ┌─────┐
+#───┘ URL └─────────────────────────────────────────────────────
+
+# Final accessible URL seen by a user.
+url: 'http://misskey.local'
+
+# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
+# URL SETTINGS AFTER THAT!
+
+#   ┌───────────────────────┐
+#───┘ Port and TLS settings └───────────────────────────────────
+
+#
+# Misskey requires a reverse proxy to support HTTPS connections.
+#
+#                 +----- https://example.tld/ ------------+
+#   +------+      |+-------------+      +----------------+|
+#   | User | ---> || Proxy (443) | ---> | Misskey (3000) ||
+#   +------+      |+-------------+      +----------------+|
+#                 +---------------------------------------+
+#
+#   You need to set up a reverse proxy. (e.g. nginx)
+#   An encrypted connection with HTTPS is highly recommended
+#   because tokens may be transferred in GET requests.
+
+# The port that your Misskey server should listen on.
+port: 61812
+
+#   ┌──────────────────────────┐
+#───┘ PostgreSQL configuration └────────────────────────────────
+
+db:
+  host: db
+  port: 5432
+
+  # Database name
+  db: misskey
+
+  # Auth
+  user: postgres
+  pass: postgres
+
+  # Whether disable Caching queries
+  #disableCache: true
+
+  # Extra Connection options
+  #extra:
+  #  ssl: true
+
+dbReplications: false
+
+# You can configure any number of replicas here
+#dbSlaves:
+#  -
+#    host:
+#    port:
+#    db:
+#    user:
+#    pass:
+#  -
+#    host:
+#    port:
+#    db:
+#    user:
+#    pass:
+
+#   ┌─────────────────────┐
+#───┘ Redis configuration └─────────────────────────────────────
+
+redis:
+  host: redis
+  port: 6379
+  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+  #pass: example-pass
+  #prefix: example-prefix
+  #db: 1
+
+#redisForPubsub:
+#  host: redis
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+
+#redisForJobQueue:
+#  host: redis
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+
+#redisForTimelines:
+#  host: redis
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+
+#redisForReactions:
+#  host: redis
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+
+#redisForRateLimit:
+#  host: localhost
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+#  # You can specify more ioredis options...
+#  #username: example-username
+
+#   ┌───────────────────────────────┐
+#───┘ Fulltext search configuration └─────────────────────────────
+
+# These are the setting items for the full-text search provider.
+fulltextSearch:
+  # You can select the ID generation method.
+  # - sqlLike (default)
+  #   Use SQL-like search.
+  #   This is a standard feature of PostgreSQL, so no special extensions are required.
+  # - sqlPgroonga
+  #   Use pgroonga.
+  #   You need to install pgroonga and configure it as a PostgreSQL extension.
+  #   In addition to the above, you need to create a pgroonga index on the text column of the note table.
+  #   see: https://pgroonga.github.io/tutorial/
+  # - meilisearch
+  #   Use Meilisearch.
+  #   You need to install Meilisearch and configure.
+  provider: sqlLike
+
+# For Meilisearch settings.
+# If you select "meilisearch" for "fulltextSearch.provider", it must be set.
+# You can set scope to local or global (default value)
+# (include notes from remote).
+
+#meilisearch:
+#  host: meilisearch
+#  port: 7700
+#  apiKey: ''
+#  ssl: true
+#  index: ''
+#  scope: global
+
+#   ┌───────────────┐
+#───┘ ID generation └───────────────────────────────────────────
+
+# You can select the ID generation method.
+# You don't usually need to change this setting, but you can
+# change it according to your preferences.
+
+# Available methods:
+# aid ... Short, Millisecond accuracy
+# aidx ... Millisecond accuracy
+# meid ... Similar to ObjectID, Millisecond accuracy
+# ulid ... Millisecond accuracy
+# objectid ... This is left for backward compatibility
+
+# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
+# ID SETTINGS AFTER THAT!
+
+id: 'aidx'
+
+#   ┌────────────────┐
+#───┘ Error tracking └──────────────────────────────────────────
+
+# Sentry is available for error tracking.
+# See the Sentry documentation for more details on options.
+
+#sentryForBackend:
+#  enableNodeProfiling: true
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
+#sentryForFrontend:
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
+#   ┌─────────────────────┐
+#───┘ Other configuration └─────────────────────────────────────
+
+# Whether disable HSTS
+#disableHsts: true
+
+# Number of worker processes
+#clusterLimit: 1
+
+# Job concurrency per worker
+# deliverJobConcurrency: 128
+# inboxJobConcurrency: 16
+
+# Job rate limiter
+# deliverJobPerSec: 128
+# inboxJobPerSec: 32
+
+# Job attempts
+# deliverJobMaxAttempts: 12
+# inboxJobMaxAttempts: 8
+
+# IP address family used for outgoing request (ipv4, ipv6 or dual)
+#outgoingAddressFamily: ipv4
+
+# Amount of characters that can be used when writing notes. Longer notes will be rejected. (minimum: 1)
+#maxNoteLength: 3000
+# Amount of characters that will be saved for remote notes. Longer notes will be truncated to this length. (minimum: 1)
+#maxRemoteNoteLength: 100000
+# Amount of characters that can be used when writing content warnings. Longer warnings will be rejected. (minimum: 1)
+#maxCwLength: 500
+# Amount of characters that will be saved for remote content warnings. Longer warnings will be truncated to this length. (minimum: 1)
+#maxRemoteCwLength: 5000
+# Amount of characters that can be used when writing media descriptions (alt text). Longer descriptions will be rejected. (minimum: 1)
+#maxAltTextLength: 20000
+# Amount of characters that will be saved for remote media descriptions (alt text). Longer descriptions will be truncated to this length. (minimum: 1)
+#maxRemoteAltTextLength: 100000
+
+# Proxy for HTTP/HTTPS
+#proxy: http://127.0.0.1:3128
+
+proxyBypassHosts:
+  - api.deepl.com
+  - api-free.deepl.com
+  - www.recaptcha.net
+  - hcaptcha.com
+  - challenges.cloudflare.com
+
+# Proxy for SMTP/SMTPS
+#proxySmtp: http://127.0.0.1:3128   # use HTTP/1.1 CONNECT
+#proxySmtp: socks4://127.0.0.1:1080 # use SOCKS4
+#proxySmtp: socks5://127.0.0.1:1080 # use SOCKS5
+
+# Media Proxy
+#mediaProxy: https://example.com/proxy
+
+# Proxy remote files (default: true)
+proxyRemoteFiles: true
+
+# Sign to ActivityPub GET request (default: true)
+signToActivityPubGet: true
+
+allowedPrivateNetworks: [
+  '127.0.0.1/32'
+]
+
+# Upload or download file size limits (bytes)
+#maxFileSize: 262144000
+
+# CHMod-style permission bits to apply to uploaded files.
+# Permission bits are specified as a base-8 string representing User/Group/Other permissions.
+# This setting is only useful for custom deployments, such as using a reverse proxy to serve media.
+#filePermissionBits: '644'
+
+# Log settings
+# logging:
+#   sql:
+#     # Outputs query parameters during SQL execution to the log.
+#     # default: false
+#     enableQueryParamLogging: false
+#     # Disable query truncation. If set to true, the full text of the query will be output to the log.
+#     # default: false
+#     disableQueryTruncation: false
+
+# Settings for the activity logger, which records inbound activities to the database.
+# Disabled by default due to the large volume of data it saves.
+#activityLogging:
+  # Log activities to the database (default: false)
+  #enabled: false
+
+  # Save the activity before processing, then update later with the results.
+  # This has the advantage of capturing activities that cause a hard-crash, but doubles the number of queries used.
+  # Default: false
+  #preSave: false
+
+  # How long to save each log entry before deleting it.
+  # Default: 2592000000 (1 week)
+  #maxAge: 2592000000

.config/docker_example.env

+# misskey settings
+# MISSKEY_URL=https://example.tld/
+
 # db settings
 POSTGRES_PASSWORD=example-misskey-pass
+# DATABASE_PASSWORD=${POSTGRES_PASSWORD}
 POSTGRES_USER=example-misskey-user
+# DATABASE_USER=${POSTGRES_USER}
 POSTGRES_DB=misskey
+# DATABASE_DB=${POSTGRES_DB}
 DATABASE_URL="postgres://${POSTGRES_USER}:${POSTGRES_PASSWORD}@db:5432/${POSTGRES_DB}"

.config/docker_example.yml

@@ -2,10 +2,68 @@
 # Misskey configuration
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
+#   ┌──────────────────────────────┐
+#───┘ a boring but important thing └────────────────────────────
+
+#
+# First of all, let me tell you a story that may possibly be
+# boring to you and possibly important to you.
+#
+# Misskey is licensed under the AGPLv3 license. This license is
+# known to be often misunderstood.  Please read the following
+# instructions carefully and select the appropriate option so
+# that you do not negligently cause a license violation.
+#
+
+# --------
+# Option 1: If you host Misskey AS-IS (without any changes to
+#           the source code. forks are not included).
+#
+# Step 1: Congratulations! You don't need to do anything.
+
+# --------
+# Option 2: If you have made changes to the source code (forks
+#           are included) and publish a Git repository of source
+#           code.  There should be no access restrictions on
+#           this repository.  Strictly speaking, it doesn't have
+#           to be a Git repository, but you'll probably use Git!
+#
+# Step 1: Build and run the Misskey server first.
+# Step 2: Open <https://your.misskey.example/admin/settings> in
+#         your browser with the administrator account.
+# Step 3: Enter the URL of your Git repository in the
+#         "Repository URL" field.
+
+# --------
+# Option 3: If neither of the above applies to you.
+#           (In this case, the source code should be published
+#           on the Misskey interface.  IT IS NOT ENOUGH TO
+#           DISCLOSE THE SOURCE CODE WHEN A USER REQUESTS IT BY
+#           E-MAIL OR OTHER MEANS.  If you are not satisfied
+#           with this, it is recommended that you read the
+#           license again carefully.  Anyway, enabling this
+#           option will automatically generate and publish a
+#           tarball at build time, protecting you from
+#           inadvertent license violations. (There is no legal
+#           guarantee, of course.)  The tarball will be generated
+#           from the root directory of your codebase.  So it is
+#           also recommended to check <built/tarball> directory
+#           once after building and before activating the server
+#           to avoid ACCIDENTAL LEAKING OF SENSITIVE INFORMATION.
+#           To prevent certain files from being included in the
+#           tarball, add a glob pattern after line 15 in
+#           <scripts/tarball.mjs>.  DO NOT FORGET TO BUILD AFTER
+#           ENABLING THIS OPTION!)
+#
+# Step 1: Uncomment the following line.
+#
+# publishTarballInsteadOfProvideRepositoryUrl: true
+
 #   ┌─────┐
 #───┘ URL └─────────────────────────────────────────────────────
 
 # Final accessible URL seen by a user.
+# You can set url from an environment variable instead.
 url: https://example.tld/
 
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
@@ -38,9 +96,11 @@ db:
   port: 5432
 
   # Database name
+  # You can set db from an environment variable instead.
   db: misskey
 
   # Auth
+  # You can set user and pass from environment variables instead.
   user: example-misskey-user
   pass: example-misskey-pass
 
@@ -103,10 +163,46 @@ redis:
 #  #prefix: example-prefix
 #  #db: 1
 
-#   ┌───────────────────────────┐
-#───┘ MeiliSearch configuration └─────────────────────────────
+#redisForReactions:
+#  host: redis
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
 
-# You can set scope to local (default value) or global 
+#redisForRateLimit:
+#  host: localhost
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+#  # You can specify more ioredis options...
+#  #username: example-username
+
+#   ┌───────────────────────────────┐
+#───┘ Fulltext search configuration └─────────────────────────────
+
+# These are the setting items for the full-text search provider.
+fulltextSearch:
+  # You can select the ID generation method.
+  # - sqlLike (default)
+  #   Use SQL-like search.
+  #   This is a standard feature of PostgreSQL, so no special extensions are required.
+  # - sqlPgroonga
+  #   Use pgroonga.
+  #   You need to install pgroonga and configure it as a PostgreSQL extension.
+  #   In addition to the above, you need to create a pgroonga index on the text column of the note table.
+  #   see: https://pgroonga.github.io/tutorial/
+  # - meilisearch
+  #   Use Meilisearch.
+  #   You need to install Meilisearch and configure.
+  provider: sqlLike
+
+# For Meilisearch settings.
+# If you select "meilisearch" for "fulltextSearch.provider", it must be set.
+# You can set scope to local or global (default value)
 # (include notes from remote).
 
 #meilisearch:
@@ -136,6 +232,21 @@ redis:
 
 id: 'aidx'
 
+#   ┌────────────────┐
+#───┘ Error tracking └──────────────────────────────────────────
+
+# Sentry is available for error tracking.
+# See the Sentry documentation for more details on options.
+
+#sentryForBackend:
+#  enableNodeProfiling: true
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
+#sentryForFrontend:
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
 
@@ -167,8 +278,18 @@ id: 'aidx'
 # IP address family used for outgoing request (ipv4, ipv6 or dual)
 #outgoingAddressFamily: ipv4
 
-# Amount of characters that can be used when writing notes (maximum: 8192, minimum: 1)
-maxNoteLength: 3000
+# Amount of characters that can be used when writing notes. Longer notes will be rejected. (minimum: 1)
+#maxNoteLength: 3000
+# Amount of characters that will be saved for remote notes. Longer notes will be truncated to this length. (minimum: 1)
+#maxRemoteNoteLength: 100000
+# Amount of characters that can be used when writing content warnings. Longer warnings will be rejected. (minimum: 1)
+#maxCwLength: 500
+# Amount of characters that will be saved for remote content warnings. Longer warnings will be truncated to this length. (minimum: 1)
+#maxRemoteCwLength: 5000
+# Amount of characters that can be used when writing media descriptions (alt text). Longer descriptions will be rejected. (minimum: 1)
+#maxAltTextLength: 20000
+# Amount of characters that will be saved for remote media descriptions (alt text). Longer descriptions will be truncated to this length. (minimum: 1)
+#maxRemoteAltTextLength: 100000
 
 # Proxy for HTTP/HTTPS
 #proxy: http://127.0.0.1:3128
@@ -198,13 +319,16 @@ proxyRemoteFiles: true
 #   https://example.com/thumbnail.webp?thumbnail=1&url=https%3A%2F%2Fstorage.example.com%2Fpath%2Fto%2Fvideo.mp4
 #videoThumbnailGenerator: https://example.com
 
-# Sign to ActivityPub GET request (default: true)
+# Sign outgoing ActivityPub GET request (default: true)
 signToActivityPubGet: true
-# check that inbound ActivityPub GET requests are signed ("authorized fetch")
-checkActivityPubGetSignature: false
+# Sign outgoing ActivityPub Activities (default: true)
+# Linked Data signatures are cryptographic signatures attached to each activity to provide proof of authenticity.
+# When using authorized fetch, this is often undesired as any signed activity can be forwarded to a blocked instance by relays and other instances.
+# This setting allows admins to disable LD signatures for increased privacy, at the expense of fewer relayed activities and additional inbound fetch (GET) requests.
+attachLdSignatureForRelays: true
 
 # For security reasons, uploading attachments from the intranet is prohibited,
-# but exceptions can be made from the following settings. Default value is "undefined". 
+# but exceptions can be made from the following settings. Default value is "undefined".
 # Read changelog to learn more (Improvements of 12.90.0 (2021/09/04)).
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
@@ -214,3 +338,33 @@ checkActivityPubGetSignature: false
 
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
+
+# CHMod-style permission bits to apply to uploaded files.
+# Permission bits are specified as a base-8 string representing User/Group/Other permissions.
+# This setting is only useful for custom deployments, such as using a reverse proxy to serve media.
+#filePermissionBits: '644'
+
+# Log settings
+# logging:
+#   sql:
+#     # Outputs query parameters during SQL execution to the log.
+#     # default: false
+#     enableQueryParamLogging: false
+#     # Disable query truncation. If set to true, the full text of the query will be output to the log.
+#     # default: false
+#     disableQueryTruncation: false
+
+# Settings for the activity logger, which records inbound activities to the database.
+# Disabled by default due to the large volume of data it saves.
+#activityLogging:
+  # Log activities to the database (default: false)
+  #enabled: false
+
+  # Save the activity before processing, then update later with the results.
+  # This has the advantage of capturing activities that cause a hard-crash, but doubles the number of queries used.
+  # Default: false
+  #preSave: false
+
+  # How long to save each log entry before deleting it.
+  # Default: 2592000000 (1 week)
+  #maxAge: 2592000000

.config/example.yml

@@ -2,6 +2,77 @@
 # Misskey configuration
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
+#   ┌──────────────────────────────┐
+#───┘ a boring but important thing └────────────────────────────
+
+#
+# First of all, let me tell you a story that may possibly be
+# boring to you and possibly important to you.
+#
+# Misskey is licensed under the AGPLv3 license. This license is
+# known to be often misunderstood.  Please read the following
+# instructions carefully and select the appropriate option so
+# that you do not negligently cause a license violation.
+#
+
+# --------
+# Option 1: If you host Misskey AS-IS (without any changes to
+#           the source code. forks are not included).
+#
+# Step 1: Congratulations! You don't need to do anything.
+
+# --------
+# Option 2: If you have made changes to the source code (forks
+#           are included) and publish a Git repository of source
+#           code.  There should be no access restrictions on
+#           this repository.  Strictly speaking, it doesn't have
+#           to be a Git repository, but you'll probably use Git!
+#
+# Step 1: Build and run the Misskey server first.
+# Step 2: Open <https://your.misskey.example/admin/settings> in
+#         your browser with the administrator account.
+# Step 3: Enter the URL of your Git repository in the
+#         "Repository URL" field.
+
+# --------
+# Option 3: If neither of the above applies to you.
+#           (In this case, the source code should be published
+#           on the Misskey interface.  IT IS NOT ENOUGH TO
+#           DISCLOSE THE SOURCE CODE WHEN A USER REQUESTS IT BY
+#           E-MAIL OR OTHER MEANS.  If you are not satisfied
+#           with this, it is recommended that you read the
+#           license again carefully.  Anyway, enabling this
+#           option will automatically generate and publish a
+#           tarball at build time, protecting you from
+#           inadvertent license violations. (There is no legal
+#           guarantee, of course.)  The tarball will generated
+#           from the root directory of your codebase.  So it is
+#           also recommended to check <built/tarball> directory
+#           once after building and before activating the server
+#           to avoid ACCIDENTAL LEAKING OF SENSITIVE INFORMATION.
+#           To prevent certain files from being included in the
+#           tarball, add a glob pattern after line 15 in
+#           <scripts/tarball.mjs>.  DO NOT FORGET TO BUILD AFTER
+#           ENABLING THIS OPTION!)
+#
+# Step 1: Uncomment the following line.
+#
+# publishTarballInsteadOfProvideRepositoryUrl: true
+
+#   ┌────────────────────────┐
+#───┘ Initial Setup Password └─────────────────────────────────────────────────────
+
+# Password to initiate setting up admin account.
+# It will not be used after the initial setup is complete.
+#
+# Be sure to change this when you set up Misskey via the Internet.
+#
+# The provider of the service who sets up Misskey on behalf of the customer should
+# set this value to something unique when generating the Misskey config file,
+# and provide it to the customer.
+#
+# setupPassword: example_password_please_change_this_or_you_will_get_hacked
+
 #   ┌─────┐
 #───┘ URL └─────────────────────────────────────────────────────
 
@@ -29,6 +100,8 @@ url: https://example.tld/
 
 # The port that your Misskey server should listen on.
 port: 3000
+# the address to bind to, defaults to "every address"
+# address: '0.0.0.0'
 
 # You can also use UNIX domain socket.
 # socket: /path/to/misskey.sock
@@ -42,10 +115,10 @@ db:
   port: 5432
 
   # Database name
-  db: misskey
+  db: sharkey
 
   # Auth
-  user: example-misskey-user
+  user: sharkey
   pass: example-misskey-pass
 
   # Whether disable Caching queries
@@ -115,10 +188,61 @@ redis:
 #  # You can specify more ioredis options...
 #  #username: example-username
 
-#   ┌───────────────────────────┐
-#───┘ MeiliSearch configuration └─────────────────────────────
+#redisForReactions:
+#  host: localhost
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+#  # You can specify more ioredis options...
+#  #username: example-username
+
+#redisForRateLimit:
+#  host: localhost
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+#  # You can specify more ioredis options...
+#  #username: example-username
 
-# You can set scope to local (default value) or global 
+#   ┌───────────────────────────────┐
+#───┘ Fulltext search configuration └─────────────────────────────
+
+# These are the setting items for the full-text search provider.
+fulltextSearch:
+  # You can select the ID generation method.
+  # - sqlLike (default)
+  #   Use SQL-like search.
+  #   This is a standard feature of PostgreSQL, so no special extensions are required.
+  # - sqlPgroonga
+  #   Use pgroonga.
+  #   You need to install pgroonga and configure it as a PostgreSQL extension.
+  #   In addition to the above, you need to create a pgroonga index on the text column of the note table.
+  #   see: https://pgroonga.github.io/tutorial/
+  # - sqlTsvector
+  #   Use Postgres tsvectors.
+  #   You need to create a generated column and index on the note table to use this, followed by an ANALYZE on the table. Beware, this will take a while to be created and the database will remain locked during this process.
+  #   This also enables advanced search syntax, see documentation of websearch_to_tsquery: https://www.postgresql.org/docs/current/textsearch-controls.html#TEXTSEARCH-PARSING-QUERIES
+  #   Support for multiple languages is currently rather poor and will be improved once post languages become a feature.
+  #
+  #   Example to set up tsvectors for an English instance:
+  #   ALTER TABLE note ADD COLUMN tsvector_embedding tsvector GENERATED ALWAYS AS ( to_tsvector('english', COALESCE(text, '') || ' ' || COALESCE(cw, '') || ' ' || COALESCE(name, ''))) STORED;
+  #   CREATE INDEX vector_idx ON note USING GIN (tsvector_embedding);
+  #   ANALYZE note;
+  #
+  #   Note: You can opt to use a different dictionary for better results if your main instance language is not English.
+  #   To get a list, use "SELECT cfgname FROM pg_ts_config;" and replace 'english' with the desired dictionary name.
+  # - meilisearch
+  #   Use Meilisearch.
+  #   You need to install Meilisearch and configure.
+  provider: sqlLike
+
+# For Meilisearch settings.
+# If you select "meilisearch" for "fulltextSearch.provider", it must be set.
+# You can set scope to local or global (default value)
 # (include notes from remote).
 
 #meilisearch:
@@ -148,6 +272,21 @@ redis:
 
 id: 'aidx'
 
+#   ┌────────────────┐
+#───┘ Error tracking └──────────────────────────────────────────
+
+# Sentry is available for error tracking.
+# See the Sentry documentation for more details on options.
+
+#sentryForBackend:
+#  enableNodeProfiling: true
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
+#sentryForFrontend:
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
 
@@ -179,8 +318,18 @@ id: 'aidx'
 # IP address family used for outgoing request (ipv4, ipv6 or dual)
 #outgoingAddressFamily: ipv4
 
-# Amount of characters that can be used when writing notes (maximum: 8192, minimum: 1)
-maxNoteLength: 3000
+# Amount of characters that can be used when writing notes. Longer notes will be rejected. (minimum: 1)
+#maxNoteLength: 3000
+# Amount of characters that will be saved for remote notes. Longer notes will be truncated to this length. (minimum: 1)
+#maxRemoteNoteLength: 100000
+# Amount of characters that can be used when writing content warnings. Longer warnings will be rejected. (minimum: 1)
+#maxCwLength: 500
+# Amount of characters that will be saved for remote content warnings. Longer warnings will be truncated to this length. (minimum: 1)
+#maxRemoteCwLength: 5000
+# Amount of characters that can be used when writing media descriptions (alt text). Longer descriptions will be rejected. (minimum: 1)
+#maxAltTextLength: 20000
+# Amount of characters that will be saved for remote media descriptions (alt text). Longer descriptions will be truncated to this length. (minimum: 1)
+#maxRemoteAltTextLength: 100000
 
 # Proxy for HTTP/HTTPS
 #proxy: http://127.0.0.1:3128
@@ -213,13 +362,16 @@ proxyRemoteFiles: true
 #   https://example.com/thumbnail.webp?thumbnail=1&url=https%3A%2F%2Fstorage.example.com%2Fpath%2Fto%2Fvideo.mp4
 #videoThumbnailGenerator: https://example.com
 
-# Sign to ActivityPub GET request (default: true)
+# Sign outgoing ActivityPub GET request (default: true)
 signToActivityPubGet: true
-# check that inbound ActivityPub GET requests are signed ("authorized fetch")
-checkActivityPubGetSignature: false
+# Sign outgoing ActivityPub Activities (default: true)
+# Linked Data signatures are cryptographic signatures attached to each activity to provide proof of authenticity.
+# When using authorized fetch, this is often undesired as any signed activity can be forwarded to a blocked instance by relays and other instances.
+# This setting allows admins to disable LD signatures for increased privacy, at the expense of fewer relayed activities and additional inbound fetch (GET) requests.
+attachLdSignatureForRelays: true
 
 # For security reasons, uploading attachments from the intranet is prohibited,
-# but exceptions can be made from the following settings. Default value is "undefined". 
+# but exceptions can be made from the following settings. Default value is "undefined".
 # Read changelog to learn more (Improvements of 12.90.0 (2021/09/04)).
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
@@ -230,5 +382,54 @@ checkActivityPubGetSignature: false
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
 
+# timeout (in milliseconds) and maximum size for imports (e.g. note imports)
+#import:
+#  downloadTimeout: 30000
+#  maxFileSize: 262144000
+
 # PID File of master process
 #pidFile: /tmp/misskey.pid
+
+# CHMod-style permission bits to apply to uploaded files.
+# Permission bits are specified as a base-8 string representing User/Group/Other permissions.
+# This setting is only useful for custom deployments, such as using a reverse proxy to serve media.
+#filePermissionBits: '644'
+
+# Log settings
+# logging:
+#   sql:
+#     # Outputs query parameters during SQL execution to the log.
+#     # default: false
+#     enableQueryParamLogging: false
+#     # Disable query truncation. If set to true, the full text of the query will be output to the log.
+#     # default: false
+#     disableQueryTruncation: false
+
+# Settings for the activity logger, which records inbound activities to the database.
+# Disabled by default due to the large volume of data it saves.
+#activityLogging:
+  # Log activities to the database (default: false)
+  #enabled: false
+
+  # Save the activity before processing, then update later with the results.
+  # This has the advantage of capturing activities that cause a hard-crash, but doubles the number of queries used.
+  # Default: false
+  #preSave: false
+
+  # How long to save each log entry before deleting it.
+  # Default: 2592000000 (1 week)
+  #maxAge: 2592000000
+
+# Transparently compress every websocket message on clients that support it.
+# Trades server CPU usage for reduced bandwidth usage and a faster frontend on the client.
+# If you're not using jemalloc, this may cause memory fragmentation and performance issues! (https://www.npmjs.com/package/ws#websocket-compression)
+# jemalloc is used by default in the Sharkey Docker image and may be set up manually otherwise: https://github.com/jemalloc/jemalloc/wiki/getting-started
+websocketCompression: false
+
+# Inject arbitrary HTML tags to customize Sharkey without having to fork it
+#customHtml:
+#  head: |
+#    <!-- The possibilities are limitless! -->
+#    <script>console.log("Hello, world!")</script>
+#    <style>.whatever { color: red; }</style>
+#    <link rel="stylesheet" href="https://example.com/styles.css">

.config/test-example.yml

+url: 'http://misskey.local'
+
+setupPassword: example_password_please_change_this_or_you_will_get_hacked
+
+# ローカルでテストするときにポートを被らないようにするためデフォルトのものとは変える(以下同じ)
+port: 61812
+
+db:
+  host: 127.0.0.1
+  port: 5432
+  db: test-misskey
+  user: postgres
+  pass: ''
+redis:
+  host: 127.0.0.1
+  port: 6379
+id: aidx

.devcontainer/docker-compose.yml → .devcontainer/compose.yml

-version: '3.8'
-
 services:
   app:
     build:
@@ -8,6 +6,7 @@ services:
 
     volumes:
       - ../:/workspace:cached
+      - node_modules:/workspace/node_modules
 
     command: sleep infinity
 
@@ -46,6 +45,7 @@ services:
 volumes:
   postgres-data:
   redis-data:
+  node_modules:
 
 networks:
   internal_network:

.devcontainer/devcontainer.json

 {
 	"name": "Misskey",
-	"dockerComposeFile": "docker-compose.yml",
+	"dockerComposeFile": "compose.yml",
 	"service": "app",
 	"workspaceFolder": "/workspace",
 	"features": {
-		"ghcr.io/devcontainers-contrib/features/pnpm:2": {
-			"version": "8.9.2"
-		},
 		"ghcr.io/devcontainers/features/node:1": {
-			"version": "20.10.0"
-		}
+			"version": "22.11.0"
+		},
+		"ghcr.io/devcontainers-contrib/features/corepack:1": {}
 	},
 	"forwardPorts": [3000],
-	"postCreateCommand": "sudo chmod 755 .devcontainer/init.sh && .devcontainer/init.sh",
+	"postCreateCommand": "/bin/bash .devcontainer/init.sh",
 	"customizations": {
 		"vscode": {
 			"extensions": [
 				"editorconfig.editorconfig",
 				"dbaeumer.vscode-eslint",
 				"Vue.volar",
-				"Vue.vscode-typescript-vue-plugin",
 				"Orta.vscode-jest",
 				"dbaeumer.vscode-eslint",
 				"mrmlnc.vscode-json5"

.devcontainer/devcontainer.yml

@@ -103,6 +103,14 @@ redis:
 #  #prefix: example-prefix
 #  #db: 1
 
+#redisForReactions:
+#  host: redis
+#  port: 6379
+#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+#  #pass: example-pass
+#  #prefix: example-prefix
+#  #db: 1
+
 #   ┌───────────────────────────┐
 #───┘ MeiliSearch configuration └─────────────────────────────
 
@@ -132,6 +140,21 @@ redis:
 
 id: 'aidx'
 
+#   ┌────────────────┐
+#───┘ Error tracking └──────────────────────────────────────────
+
+# Sentry is available for error tracking.
+# See the Sentry documentation for more details on options.
+
+#sentryForBackend:
+#  enableNodeProfiling: true
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
+#sentryForFrontend:
+#  options:
+#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'
+
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
 

.devcontainer/init.sh

@@ -2,10 +2,16 @@
 
 set -xe
 
-sudo chown -R node /workspace
+sudo chown node node_modules
+sudo apt-get update
+sudo apt-get -y install libgtk2.0-0 libgtk-3-0 libgbm-dev libnotify-dev libnss3 libxss1 libasound2 libxtst6 xauth xvfb
+git config --global --add safe.directory /workspace
 git submodule update --init
+corepack install
+corepack enable
 pnpm config set store-dir /home/node/.local/share/pnpm/store
 pnpm install --frozen-lockfile
 cp .devcontainer/devcontainer.yml .config/default.yml
 pnpm build
 pnpm migrate
+pnpm exec cypress install

.dockerignore

@@ -7,12 +7,11 @@ Dockerfile
 build/
 built/
 db/
-docker-compose.yml
+.devcontainer/compose.yml
 node_modules/
 packages/*/node_modules
 redis/
 files/
-misskey-assets/
 fluent-emojis/
 .pnp.*
 
@@ -28,4 +27,4 @@ fluent-emojis/
 
 .idea/
 packages/*/.vscode/
-packages/backend/test/docker-compose.yml
+packages/backend/test/compose.yml

.gitignore

@@ -23,6 +23,9 @@ packages/sw/.yarn/cache
 # pnpm
 .pnpm-store
 
+# eslint
+**/.eslintcache
+
 # Cypress
 cypress/screenshots
 cypress/videos
@@ -33,15 +36,20 @@ coverage
 # config
 /.config/*
 !/.config/example.yml
+!/.config/test-example.yml
 !/.config/docker_example.yml
 !/.config/docker_example.env
+!/.config/cypress-devcontainer.yml
 docker-compose.yml
-!/.devcontainer/docker-compose.yml
+./compose.yml
+.devcontainer/compose.yml
+!/.devcontainer/compose.yml
 
 # misskey
 /build
 built
 built-test
+js-built
 /data
 /.cache-loader
 /db
@@ -59,9 +67,13 @@ ormconfig.json
 temp
 /packages/frontend/src/**/*.stories.ts
 tsdoc-metadata.json
+misskey-assets
 
-# Sharkey
-/packages/megalodon/lib
+# Vite temporary files
+vite.config.js.timestamp-*
+vite.config.ts.timestamp-*
+vite.config.local-dev.js.timestamp-*
+vite.config.local-dev.ts.timestamp-*
 
 # blender backups
 *.blend1
@@ -72,3 +84,6 @@ tsdoc-metadata.json
 
 # VSCode addon
 .favorites.json
+
+# Sharkey
+/packages/megalodon/lib

.gitlab-ci.yml

@@ -4,21 +4,26 @@ stages:
 
 testCommit:
   stage: test
-  image: node:latest
+  image: node:jod
   services:
     - postgres:15
     - redis
   variables:
     POSTGRES_PASSWORD: ci
+    COREPACK_DEFAULT_TO_LATEST: 0
   script:
-    - apt-get update && apt-get install -y git wget curl build-essential python3 
+    - apt-get update && apt-get install -y git wget curl build-essential python3 ffmpeg
     - cp .config/ci.yml .config/default.yml
+    - cp .config/ci.yml .config/test.yml
     - corepack enable
-    - corepack prepare pnpm@latest --activate
+    - corepack install
     - git submodule update --init
     - pnpm install --frozen-lockfile
     - pnpm run build
     - pnpm run migrate
+    - pnpm run test
+    - pnpm run --filter=backend --filter=misskey-js --filter=frontend-shared lint
+    - pnpm run --filter=frontend --filter=frontend-embed eslint
   cache:
     key: test
     policy: pull-push
@@ -55,6 +60,8 @@ getImageTag:
   only:
     - stable
     - develop
+    - tags
+
 buildDocker:
   stage: deploy
   needs:
@@ -78,6 +85,8 @@ buildDocker:
   only:
     - stable
     - develop
+    - tags
+
 mergeManifests:
   stage: deploy
   needs:
@@ -103,3 +112,4 @@ mergeManifests:
   only:
     - stable
     - develop
+    - tags

.gitlab/issue_templates/bug.md

@@ -3,27 +3,33 @@
 🔒 Found a security vulnerability? [Please disclose it responsibly.](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/SECURITY.md)
 🤝 By submitting this feature request, you agree to follow our [Contribution Guidelines.](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/CONTRIBUTING.md) -->
 
-**What happened?** _(Please give us a brief description of what happened.)_
+# **What happened?**
+<!-- Please give us a brief description of what happened. -->
 
-**What did you expect to happen?** _(Please give us a brief description of what you expected to happen.)_
+# **What did you expect to happen?**
+<!-- Please give us a brief description of what you expected to happen. -->
 
-**Version** _(What version of Sharkey is your instance running? You can find this by clicking your instance's logo at the top left and then clicking instance information.)_
+# **Version**
+<!-- What version of Sharkey is your instance running? You can find this by clicking your instance's logo at the top left and then clicking instance information. -->
 
-**Instance** _(What instance of Sharkey are you using?)_
+# **Instance**
+<!-- What instance of Sharkey are you using? -->
 
-**What type of issue is this?** _(If this happens on your device and has to do with the user interface, it's client-side. If this happens on either with the API or the backend, or you got a server-side error in the client, it's server-side.)_
+# **What type of issue is this?**
+<!-- If this happens on your device and has to do with the user interface, it's client-side. If this happens on either with the API or the backend, or you got a server-side error in the client, it's server-side. -->
 
-**What browser are you using? (Client-side issues only)**
+# **What browser are you using? (Client-side issues only)**
 
-**What operating system are you using? (Client-side issues only)**
+# **What operating system are you using? (Client-side issues only)**
 
-**How do you deploy Sharkey on your server? (Server-side issues only)**
+# **How do you deploy Sharkey on your server? (Server-side issues only)**
 
-**What operating system are you using? (Server-side issues only)**
+# **What operating system are you using? (Server-side issues only)**
 
-**Relevant log output** _(Please copy and paste any relevant log output. You can find your log by inspecting the page, and going to the "console" tab. This will be automatically formatted into code, so no need for backticks.)_
+# **Relevant log output**
+<!-- Please copy and paste any relevant log output. You can find your log by inspecting the page, and going to the "console" tab. This will be automatically formatted into code, so no need for backticks. -->
 
-**Contribution Guidelines**
+# **Contribution Guidelines**
 By submitting this issue, you agree to follow our [Contribution Guidelines](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/CONTRIBUTING.md)
 - [ ] I agree to follow this project's Contribution Guidelines
 - [ ] I have searched the issue tracker for similar issues, and this is not a duplicate.

.gitlab/issue_templates/feature.md

@@ -3,15 +3,19 @@
 🔒 Found a security vulnerability? [Please disclose it responsibly.](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/SECURITY.md)
 🤝 By submitting this feature request, you agree to follow our [Contribution Guidelines.](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/CONTRIBUTING.md) -->
 
-**What feature would you like implemented?** _(Please give us a brief description of what you'd like.)_
+# **What feature would you like implemented?**
+<!-- Please give us a brief description of what you'd like. -->
 
-**Why should we add this feature?** _(Please give us a brief description of why your feature is important.)_
+# **Why should we add this feature?**
+<!-- Please give us a brief description of why your feature is important. -->
 
-**Version** _(What version of Sharkey is your instance running? You can find this by clicking your instance's logo at the top left and then clicking instance information.)_
+# **Version**
+<!-- What version of Sharkey is your instance running? You can find this by clicking your instance's logo at the top left and then clicking instance information. -->
 
-**Instance** _(What instance of Sharkey are you using?)_
+# **Instance**
+<!-- What instance of Sharkey are you using? -->
 
-**Contribution Guidelines**
+# **Contribution Guidelines**
 By submitting this issue, you agree to follow our [Contribution Guidelines](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/CONTRIBUTING.md)
 - [ ] I agree to follow this project's Contribution Guidelines
 - [ ] I have searched the issue tracker for similar requests, and this is not a duplicate.

.gitlab/merge_request_templates/default.md

 <!-- Thanks for taking the time to make Sharkey better!  -->
 
-**What does this PR do?** _(Please give us a brief description of what this PR does.)_
+# **What does this MR do?**
+<!-- Please give us a brief description of what this PR does. -->
 
-**Contribution Guidelines**
+%{all_commits}
+
+# **Contribution Guidelines**
 By submitting this merge request, you agree to follow our [Contribution Guidelines](https://activitypub.software/TransFem-org/Sharkey/-/blob/develop/CONTRIBUTING.md)
 - [ ] I agree to follow this project's Contribution Guidelines
-- [ ] I have made sure to test this pull request
+- [ ] I have made sure to test this merge request
 
 <!-- Uncomment if your merge request has multiple authors -->
-<!-- Co-authored-by: Name <email@email.com> -->
+<!-- %{co_authored_by} -->

.gitmodules

-[submodule "misskey-assets"]
-	path = misskey-assets
-	url = https://github.com/misskey-dev/assets.git
 [submodule "fluent-emojis"]
 	path = fluent-emojis
 	url = https://github.com/misskey-dev/emojis.git
 [submodule "tossface-emojis"]
 	path = tossface-emojis
-	url = https://git.joinsharkey.org/Sharkey/tossface-emojis.git
+	url = https://activitypub.software/TransFem-org/tossface-emojis.git

.node-version

-20.10.0
+22.11.0

.old/workflows/lint.yml

-name: Lint
-
-on:
-  push:
-    branches:
-      - stable
-      - develop
-    paths:
-      - packages/**
-  pull_request:
-    paths:
-      - packages/backend/**
-      - packages/frontend/**
-      - packages/sw/**
-      - packages/misskey-js/**
-      - packages/shared/.eslintrc.js
-
-jobs:
-  pnpm_install:
-    runs-on: docker
-    steps:
-    - uses: actions/checkout@v4.1.1
-      with:
-        fetch-depth: 0
-        submodules: true
-    - uses: https://github.com/pnpm/action-setup@v2
-      with:
-        version: 8
-        run_install: false
-    - uses: https://code.forgejo.org/actions/setup-node@v4
-      with:
-        node-version-file: '.node-version'
-        cache: 'pnpm'
-    - run: corepack enable
-    - run: pnpm i --frozen-lockfile
-
-  lint:
-    needs: [pnpm_install]
-    runs-on: docker
-    continue-on-error: true
-    strategy:
-      matrix:
-        workspace:
-        - backend
-        - frontend
-        - sw
-        - misskey-js
-    steps:
-    - uses: actions/checkout@v4.1.1
-      with:
-        fetch-depth: 0
-        submodules: true
-    - uses: https://github.com/pnpm/action-setup@v2
-      with:
-        version: 7
-        run_install: false
-    - uses: https://code.forgejo.org/actions/setup-node@v4
-      with:
-        node-version-file: '.node-version'
-        cache: 'pnpm'
-    - run: corepack enable
-    - run: pnpm i --frozen-lockfile
-    - run: pnpm --filter ${{ matrix.workspace }} run eslint
-
-  typecheck:
-    needs: [pnpm_install]
-    runs-on: docker
-    continue-on-error: true
-    strategy:
-      matrix:
-        workspace:
-        - backend
-        - misskey-js
-    steps:
-    - uses: actions/checkout@v4.1.1
-      with:
-        fetch-depth: 0
-        submodules: true
-    - uses: https://github.com/pnpm/action-setup@v2
-      with:
-        version: 7
-        run_install: false
-    - uses: https://code.forgejo.org/actions/setup-node@v4
-      with:
-        node-version-file: '.node-version'
-        cache: 'pnpm'
-    - run: corepack enable
-    - run: pnpm i --frozen-lockfile
-    - run: pnpm --filter misskey-js run build
-      if: ${{ matrix.workspace == 'backend' }}
-    - run: pnpm --filter misskey-reversi run build:tsc
-      if: ${{ matrix.workspace == 'backend' }}
-    - run: pnpm --filter misskey-bubble-game run build
-      if: ${{ matrix.workspace == 'backend' }}
-    - run: pnpm --filter ${{ matrix.workspace }} run typecheck

.vscode/extensions.json

@@ -3,9 +3,7 @@
 		"editorconfig.editorconfig",
 		"dbaeumer.vscode-eslint",
 		"Vue.volar",
-		"Vue.vscode-typescript-vue-plugin",
 		"Orta.vscode-jest",
-		"dbaeumer.vscode-eslint",
 		"mrmlnc.vscode-json5"
 	]
 }